Trucking Fleet Management: What It Covers and How to Do It
Last updated:
Fleet management in trucking is the work of keeping every truck earning, legal and safe at the same time. It covers dispatch, drivers, compliance, maintenance, fuel and cost control, and the paperwork behind each load. Software helps with each of those, but no single product does all of them, so the real job is knowing which tool covers which part.
What fleet management covers in trucking
- Dispatch and load planning. Choosing loads that clear your cost per mile, planning the reload before delivery and keeping trucks moving. How many trucks one dispatcher can manage.
- Drivers. Hiring, onboarding, pay and settlements, and keeping each driver inside their hours of service.
- Compliance. Hours of service, fuel tax, inspections and the DOT records the FMCSA expects you to keep. The calendar is below.
- Maintenance and equipment. Preventive maintenance, inspections and repairs. A dash light is a fault code first: look up an OBD-II fault code.
- Fuel and costs. Fuel is one of the biggest costs of running a truck. What a fuel card does and what it costs per mile, using the cost per mile calculator.
- Safety and tracking. Knowing where trucks are, how they are driven and how the fleet looks in FMCSA safety data.
- Back office. Rate confirmations, bills of lading, invoicing, detention claims and settlements.
Types of fleet management software
Most fleets end up with two or three of these. The useful question is what each one does and what it leaves for you to do.
| Type | What it does | What it leaves to you |
|---|---|---|
| ELD and telematics | Records hours of service, shows truck location, and often reports vehicle data | Dispatch, paperwork, invoicing and the calls to brokers and drivers |
| Maintenance and asset software | Schedules preventive maintenance, inspections, work orders and parts | Load planning, driver pay and the back office |
| TMS | Holds load records, dispatch, tracking and billing | The work itself: someone still enters, chases and files |
| Fuel card and IFTA tools | Record fuel purchases and prepare the fuel tax return | Mileage by state if it is not captured elsewhere |
| Back-office automation | Does the routine paperwork, check calls and document handling, and escalates the rest | Hardware, maintenance records and the decisions that need a person |
An ELD is a registered device, not a full system: most carriers that keep logs must use one, and tracking features sit on top of it. Why a TMS alone still leaves manual work.
The metrics worth tracking
You do not need a dashboard of fifty numbers. These eight, reviewed weekly, show whether the fleet is making money.
- Cost per mile = total operating costs ÷ total miles (loaded and empty). Calculate yours.
- Revenue per mile = revenue ÷ total miles. Compare it with cost per mile. Check fleet profitability.
- Deadhead percentage = empty miles ÷ total miles. How to reduce deadhead miles.
- Truck utilization: how much of the time each truck is actually earning. How to measure and raise it.
- Fuel economy (MPG) = miles ÷ gallons, by truck and by driver.
- Maintenance cost per mile = maintenance and repair spend ÷ miles.
- On-time delivery rate = deliveries on time ÷ total deliveries.
- Driver turnover = drivers who left ÷ average number of drivers over the period.
How to manage a trucking fleet, step by step
- Know your cost per mile. Every load, hire and purchase decision depends on it. Work it out first.
- Set a rate floor and a utilization target. Write down the lowest rate per mile you will accept by lane, so the decision is not made load by load at the end of the day. How to set a floor.
- Keep a compliance calendar. Missed deadlines cost more than the work of meeting them.
- Schedule preventive maintenance. A planned service costs less than a roadside repair and a missed load.
- Track the metrics weekly. Trends show up before the monthly books do.
- Automate the routine work as you grow. The first truck is run on a spreadsheet, the fifth needs a system, and the twentieth needs the routine work taken off the desk. What can be automated, and what cannot.
The compliance calendar
- Hours of service: logged daily, through an ELD for most carriers
- IFTA fuel tax returns: every quarter
- Annual vehicle inspection: at least every 12 months for each commercial vehicle
- Drug and alcohol Clearinghouse queries: at least once a year for each CDL driver
- Unified Carrier Registration (UCR) and Form 2290 heavy vehicle use tax: every year
- MCS-150 update: every two years
Fuel and mileage records feed the IFTA return: the IFTA calculator estimates the tax. Employers check the Drug and Alcohol Clearinghouse before hiring a CDL driver. Verify any carrier you work with in the trucking company directory, which shows USDOT and MC numbers and FMCSA safety records.
Fleet management for a small fleet
One to a few trucks. An ELD, a fuel card with good reports and a spreadsheet for cost per mile cover most of it. The time goes into dispatch and paperwork, not software choice. How to dispatch your own truck.
A growing fleet. Past a handful of trucks the paperwork and check calls grow faster than the revenue. That is the point to add a TMS or automate the routine work rather than another dispatcher.
Questions to ask any vendor. Does it work with my ELD? Does it export fuel and mileage data for IFTA? Who does the work: does it record what I do, or do it? How does the price change per truck, and what do hardware and setup cost? Can I take my data with me if I leave?
Frequently asked questions
It is the work of keeping a group of trucks and drivers earning, legal and safe: planning loads, managing drivers, staying compliant, maintaining equipment, controlling fuel and costs, and handling the paperwork behind every load.
It depends on the type. ELD and telematics systems track location and hours of service, maintenance software schedules inspections and repairs, a TMS records loads and billing, and back-office automation does the routine paperwork and calls. No single product covers every part of the job.
Start with your cost per mile, set a rate floor and utilization targets, keep a compliance calendar, schedule preventive maintenance, track a handful of metrics every week, and automate the routine work as the fleet grows.
A TMS is built around loads: dispatch, tracking and billing. Fleet management software is built around the trucks and drivers: location, maintenance, inspections and compliance. Many fleets run both side by side.
No. An ELD is the registered device that records hours of service, and most carriers that keep logs must use one. Fleet tracking and vehicle data are extra features some ELD providers add, but an ELD alone does not handle maintenance, dispatch, paperwork or costs.
Fleet tracking shows where each truck is, usually from the GPS in an ELD or telematics device. It supports ETAs, check calls and dispatch decisions, and it is one part of fleet management rather than all of it.
Start from the problem that costs you the most time or money, then check that the product works with your ELD, exports clean fuel and mileage data for IFTA, and prices in a way that scales per truck. Ask who does the work: a system that only records it still leaves the work with you.
Related
Hey Bubba! is not an ELD or a maintenance system. It automates the routine back-office work across dispatch, paperwork and driver communication, working alongside the ELD and TMS you already use. See how
Last updated:
Automate the work behind your fleet.
Load search, rate negotiation, paperwork and check calls handled for your trucks, so the work in this guide gets done every time.