Trucking Dispatch Software: Types and How to Choose
Last updated:
Trucking dispatch software is anything that helps a carrier find loads, assign them to trucks and drivers, track them and keep the paperwork straight. The products behind that name do very different jobs: a load board only finds freight, a TMS records it, and dispatch automation does part of the work itself. Choosing well starts with knowing which job you need done.
What dispatch involves
Before the load: searching boards, screening for profitability, calling brokers, negotiating the rate and checking the rate confirmation.
During the load: check calls, tracking updates, appointment changes and handling delays and breakdowns.
After the load: collecting the POD, invoicing, claiming detention and following up on payment.
Dispatch software can help at each of those steps, but few products cover all three. More on what the job takes.
Types of dispatch software
| Type | What it does | What it leaves to you |
|---|---|---|
| Load boards | Show available freight and rates | Screening, calling, negotiating, booking and paperwork |
| TMS | Holds load records, assigns drivers, tracks loads and handles billing | The work itself: someone still enters data, makes the calls and files documents |
| ELD and telematics | Show truck location and remaining hours of service | Finding, booking and documenting loads |
| Planning and routing tools | Plan routes, stops and mileage | Load search, rates and paperwork |
| Dispatch automation and AI dispatch | Searches loads, screens them, makes first-pass calls, runs check calls and handles documents | Exceptions and the decisions you choose to keep |
Most fleets combine two or three: a load board for freight, an ELD for position and hours, and a TMS once the load count grows. Why a TMS alone still leaves manual work.
What good dispatch software should do
- Screen loads against your cost per mile, including deadhead, before you spend time on them. Work out your cost per mile and how to calculate load profitability.
- Use live truck position and hours of service, so loads are matched to trucks that can legally run them.
- Support negotiation against a rate floor instead of accepting the posted rate. How to negotiate with brokers.
- Handle check calls and tracking updates without a person on the phone.
- Capture documents and timestamps at the time they happen: rate confirmations, BOLs, PODs and the arrival and departure times a detention claim needs.
- Connect to your ELD, TMS and load boards rather than adding another place to type the same data.
Dispatch software, a dispatch service or a dispatcher
Software costs a flat fee per truck and does the same routine work every time. A dispatch service commonly takes a percentage of each load, often in the 5 to 10% range, and does the work for you. A dispatcher you hire costs a salary and brings judgement, but their day is mostly routine communication that does not shrink as the fleet grows.
The comparison that matters is cost against revenue and load count, and who is accountable when a rate or a claim slips. What dispatch services cost, and the alternatives and where a dispatcher's ceiling sits.
How to choose trucking dispatch software
- Name the problem first. Is it finding loads, the calls, the paperwork or visibility? Buy for the biggest time cost.
- Check the integrations. It should work with your ELD and load boards.
- Ask who does the work. A system that records what you do still leaves the work with you. One that does it should say what it escalates.
- Look at how it prices. Per truck, per load or a percentage behave very differently as you grow.
- Test it on a real week of loads before committing, and check you can take your data with you if you leave.
Dispatch software by fleet size
One truck. The work is the same as a larger fleet, with nobody to hand it to. A load board, an ELD and a way to screen loads against your cost per mile cover most of it. The time goes into calls and paperwork, so that is where software earns its place.
Two to ten trucks. Volume starts to outrun one person. Check calls, document chasing and rate counters multiply with every truck, and a TMS or dispatch automation starts to pay for itself. What this looks like for small trucking fleets.
A mid-size fleet. The question shifts from finding a tool to connecting them. Dispatchers, drivers, ELD, TMS and accounting need to share the same load record, and the cost of re-keying data shows up as errors and late invoices.
An enterprise fleet. Security review, integrations and an audit trail matter as much as features. What enterprise fleet automation involves.
What to connect it to
- Your ELD, for live position and hours of service, so loads go to trucks that can run them.
- Your load boards, such as DAT and Truckstop, so search and booking happen in one place.
- Your TMS, so load records, documents and milestones are written once. Automating around your TMS.
- Your accounting and factoring, so a delivered load becomes an invoice without retyping.
How AI changes dispatch software
Traditional dispatch software records what you do and shows you what to look at. AI dispatch does part of the work itself: it searches, screens loads on net revenue per mile, counters against a rate floor you set, runs check calls and files the documents. You decide how much it does alone and when it asks you first.
That is why the questions to ask have changed. It is less about which screens a product has and more about what it does without you, what it escalates and how you can see and override it. What can and cannot be automated.
How to tell if it is working
Five numbers show whether dispatch software is paying for itself:
- Deadhead percentage = empty miles ÷ total miles. How to reduce deadhead miles.
- Net revenue per mile after deadhead, against your cost per mile. How to calculate load profitability.
- Trucks per dispatcher: how many trucks one person manages without loads going uncovered.
- Time to cover a load: from a load posting to a booked rate confirmation.
- Detention and accessorials billed as a share of what was earned, which depends on the arrival and departure times being captured. What detention covers.
Common mistakes when buying dispatch software
- Buying a TMS to fix a problem that is really load search or paperwork.
- Choosing on the headline price per truck without counting hardware, setup and add-ons.
- Adding a tool that needs the same data typed into a second system.
- Skipping a trial on a real week of loads, where the edge cases show up.
- Letting automation act with no rules, instead of setting a rate floor and approvals first.
Dispatch terms in plain English
- Load board: a marketplace where brokers and shippers post freight.
- TMS: a transportation management system that holds load records, dispatch and billing.
- ELD: the electronic logging device that records hours of service.
- Rate confirmation: the broker document that fixes the rate and terms of a load. What it contains.
- Check call: a status update on where a load is and when it will deliver.
- Deadhead: miles driven empty. Deadhead explained.
If you are weighing AI dispatch, see whether AI can find and book loads for your truck.
Frequently asked questions
Software that helps a carrier find loads, assign them to trucks and drivers, track them and keep the paperwork straight. Some products cover only one step, such as a load board, while others cover several.
There is no single best product. Pick the one that removes your biggest time cost, works with your ELD and load boards, and prices per truck so it scales. For a small fleet that is usually load search and paperwork rather than a full TMS.
A TMS records loads, dispatch and billing. Dispatch software is a broader term that can include load search, tracking and automation. A one or two truck carrier can often run on a load board and an ELD; a growing fleet usually adds a TMS.
A dispatcher finds and books loads, negotiates the rate, assigns them to drivers, tracks each load and handles delays and paperwork. Software takes over part of that routine work, not the judgement calls.
Dispatch services commonly charge a percentage of each load, often in the 5 to 10% range. Software is usually priced per truck per month instead. Compare the two on your own revenue and load count. Dispatch services for owner-operators: costs and alternatives.
AI can do the routine part of dispatch: searching loads, screening them against your cost per mile, making first-pass broker calls, running check calls and handling paperwork. A person still handles exceptions and the decisions you want to keep. Can AI find and book loads for my truck?.
Dispatch automation is software doing the repeatable dispatch tasks without someone doing them by hand: load search, rate counters, check calls, document capture and status updates. The rules you set decide what it does alone and what it escalates.
A load board shows freight that is available. Dispatch software is what you use to decide which loads to take, assign them to trucks, track them and keep the paperwork. Most carriers use both, because the board finds loads and the software helps run them.
It can take over the routine volume: searching, screening, first-pass calls, check calls and paperwork. It does not replace judgement on exceptions, difficult customers or whether a lane is worth keeping, so most fleets use it to let each dispatcher handle more trucks. How many trucks can one dispatcher manage?.
It is worth it when the time it saves is worth more than it costs. Self-dispatching takes roughly two hours a day for one truck, and the parts that get skipped when you are driving, such as countering rates and claiming detention, are the parts that pay. How to dispatch your own truck.
Load screening against your cost per mile, live truck position and hours of service, rate negotiation against a floor, check calls and tracking updates, document and timestamp capture, and integrations with your ELD, TMS and load boards.
Many products connect to the major ELD providers, but not all of them do, and the depth varies. Ask which ELD fields it reads (position, hours remaining, status) and whether it writes anything back, before you commit.
Common models are a monthly fee per truck, a fee per load, a percentage of revenue, or a fee per user. Each behaves differently as you grow, so price it against your own truck count, load count and revenue.
Related
Hey Bubba! is not a load board or a TMS. It does the routine dispatch work (searching, first-pass broker calls, check calls and paperwork), works alongside the ELD, TMS and load boards you already use, and escalates the rest. See how
Last updated:
Automate the work behind your fleet.
Load search, rate negotiation, paperwork and check calls handled for your trucks, so the work in this guide gets done every time.