Facebook tracking pixel

Trailer capacity calculator

A trailer capacity calculator shows how many pallets fit in a trailer or truck. A 53 foot dry van holds 26 standard 48 by 40 inch pallets loaded lengthwise and 30 when they are turned, or up to 60 stacked two high if the freight and the payload allow it.

Pick a trailer and a pallet size, choose how high you can stack, and add the weight per pallet to check the payload. This free calculator is an estimate for planning a load. No signup.

Formula
Pallets that fit = the smaller of (pallets on the floor x layers) and (payload / weight per pallet). Floor pallets = pallets across the width x rows along the length.
Example
A 53 ft dry van with 48 x 40 in pallets: 26 lengthwise, 30 turned, 60 stacked two high
Best for
Dispatchers, drivers and shippers planning a load. Free, no signup, from Hey Bubba!, the AI back office for trucking.
Last updated
November 18, 2026
Trailer or truck

Pick a typical trailer, or type your own inside measurements. Sizes are the usable interior, in inches.

Trailer type
Interior length
in
Interior width
in
Interior height
in
Max payload
lbs
Pallets

The size of one loaded pallet. Height and weight include the freight on it.

Pallet size
Pallet length
in
Pallet width
in
Loaded height
in
Weight per pallet
lbs
Stacking

How many pallets high you can stack this freight. We stop at what the interior height allows.

Pallets high

Pallets per trailer: standard 48 x 40 in pallets

Typical interior sizes and pallets 48 inches tall. Stacked means two high.

Standard pallets that fit in each trailer, loaded lengthwise, turned and stacked two high
TrailerInterior (L x W x H)Cubic feetLengthwiseTurned or mixedStacked
53 ft dry van632 x 100 x 108 in3,950263060
48 ft dry van570 x 100 x 108 in3,560222856
28 ft pup trailer330 x 100 x 108 in2,060121632
26 ft box truck312 x 96 x 96 in1,660121428
24 ft box truck288 x 96 x 96 in1,540121428

How to use the trailer capacity calculator

Have the trailer size, the pallet size and the weight of one loaded pallet ready.

  1. Pick the trailer

    Choose a 53 ft or 48 ft dry van, a 28 ft pup or a box truck. The inside length, width, height and payload fill in, and you can change any of them.

  2. Pick the pallet

    Choose the standard 48 x 40 inch pallet or another common size, or type your own length and width.

  3. Enter the loaded height and weight

    Type the height of one pallet with the freight on it and its weight. The height sets how high you can stack, and the weight checks the payload.

  4. Choose how high to stack

    Pick 1, 2 or 3 pallets high. The calculator stops at what the interior height allows.

  5. Read the result

    See how many pallets fit, whether space or weight is the limit, and how many feet of trailer the load uses.

How many pallets fit in a 53 foot trailer

A 53 foot dry van has about 52 ft 8 in of usable length and 100 inches of width. Loaded lengthwise, standard 48 by 40 inch pallets go two across and 13 deep, which is 26 pallets. Turned so the 40 inch side runs along the trailer, they go two across and 15 deep, which is 30 pallets.

Stack the freight two high and the count doubles to 60, as long as the pallets are safe to stack, the interior height allows it, and the load stays under the payload limit of about 45,000 pounds.

53 ft trailer dimensions and other trailer sizes

These are typical usable interior sizes. Trailers vary by maker and age, so measure yours and type the numbers into the calculator.

  • 53 ft dry van: 632 x 100 x 108 in (52 ft 8 in long, about 3,950 cubic feet), about 45,000 lbs of payload.
  • 48 ft dry van: 570 x 100 x 108 in (47 ft 6 in long, about 3,560 cubic feet), about 45,000 lbs of payload.
  • 28 ft pup trailer: 330 x 100 x 108 in (27 ft 6 in long, about 2,060 cubic feet), about 22,000 lbs of payload.
  • 26 ft box truck: 312 x 96 x 96 in (26 ft 0 in long, about 1,660 cubic feet), about 10,000 lbs of payload.
  • 24 ft box truck: 288 x 96 x 96 in (24 ft 0 in long, about 1,540 cubic feet), about 10,000 lbs of payload.

Linear feet and pallets

Linear feet is the length of trailer floor your freight takes up. Many LTL carriers use it to price large or volume loads, and it is also how a dispatcher sees how much room is left on a truck.

A full 53 foot trailer has about 52 linear feet of floor. A row of two standard pallets loaded lengthwise uses 4 feet, and a turned row uses 3 feet 4 inches. The calculator shows the trailer length your load uses, in feet.

See also: Freight class calculator · Load profitability calculator · Freight rate per mile calculator

How the trailer capacity calculator works

The calculator packs the trailer floor in full width rows, then applies your stack height and payload.

  • Across the width it fits as many pallets as the inside width allows, in each of the two directions a pallet can face.
  • A lengthwise row has the long side along the trailer. A turned row has the short side along the trailer.
  • It tries every mix of lengthwise and turned rows along the length and keeps the one that holds the most pallets.
  • Stack height is limited by the interior height divided by the loaded pallet height, rounded down.
  • Pallets that fit is the smaller of the space count and the payload divided by the weight per pallet.

Using the estimate with your load plan

The result is a clear starting point for planning a load. Real trailers have details a calculator can't see: wheel wells in box trucks, load bars and straps, pallet overhang, a smaller interior in a reefer, and axle weight limits. Check the final plan with your driver or carrier, and weigh heavy loads before they leave.

FAQ's

A 53 foot dry van fits 26 standard 48 by 40 inch pallets loaded lengthwise (two across, 13 deep) and 30 when they are turned (two across, 15 deep). Stacked two high, that is up to 60, if the freight is stackable, the interior height allows it and the load stays under the payload limit.